Accessories
Because of differing customer requirements, sensor interface boards and the SDS232 do not include the 32 channel SIB cable that connects to the front panel of the PhotoniQ. This cable should be ordered separately in a length suitable for your application. A 90 cm high voltage cable is included with each high voltage module ordered, although other lengths can be separately purchased. All SIB and high voltage cables can be used with any Vertilon sensor interface board and any 32 or 64 channel PhotoniQ model.

Photomultiplier Tube Sensor Interface Board Cables SIB Cables
SIB cables for sensor interface boards are offered in three standard lengths and in custom lengths up to 180 cm. One cable is needed for each sensor interface board in the system. Typically, applications utilizing an IQSP480 or IQSP580 require one SIB cable while those utilizing an IQSP482 or IQSP582 require two. If an SDS232 is used in place of a sensor interface board, a standard 48 cm length cable is available. Other cable lengths for the SDS232 can be special ordered.















SBC030
SBC060
SBC090
SBCxxx


SBC030P
SBC060P
SBC090P
SBCxxxP


SDC048
SDCxxx














Sensor interface board cable, 30 cm, panel mount
Sensor interface board cable, 60 cm, panel mount
Sensor interface board cable, 90 cm, panel mount
Sensor interface board cable, xxx cm, panel mount, custom order
Product Sheet: SBCxxx Sensor Interface Board Cables

Sensor interface board cable, 30 cm, PCB mount (OEM)
Sensor interface board cable, 60 cm, PCB mount (OEM)
Sensor interface board cable, 90 cm, PCB mount (OEM)
Sensor interface board cable, xxx cm, PCB mount (OEM), custom order
Product Sheet: SBCxxxP Sensor Interface Board Cables (OEM)

SDS232 interface cable, 48 cm, panel mount
SDS232 interface cable, xxx cm, panel mount, custom order
Product Sheet: SDCxxx SDS232 Interface Cables
High Voltage Cables for Photomultiplier Tubes and APDs High Voltage Cables
Each high voltage module installed in a PhotoniQ requires a high voltage cable to connect the HV output on the PhotoniQ front panel to the HV input on the sensor interface board. The connection to the PhotoniQ is made using an industry standard SHV high voltage plug. Alternatively for OEM applications the "P" version of the cable is ordered. It uses a specialized low-profile connector to make a direct connection to the PhotoniQ printed circuit board. For all versions, the SIB's high voltage connection is made with the same specialized connector. Each high voltage module ordered includes one 90 cm high voltage cable. Extra high voltage cables are available in three standard lengths and in custom lengths up to 180 cm.











HVC030
HVC060
HVC090
HVCxxx


HVC030P
HVC060P
HVC090P
HVCxxxP










High voltage cable, 30 cm, panel mount
High voltage cable, 60 cm, panel mount
High voltage cable, 90 cm, panel mount
High voltage cable, xxx cm, panel mount, custom order
Product Sheet: HVCxxx High Voltage PMT Cables

High voltage cable, 30 cm, PCB mount (OEM)
High voltage cable, 60 cm, PCB mount (OEM)
High voltage cable, 90 cm, PCB mount (OEM)
High voltage cable, xxx cm, PCB mount (OEM), custom order
Product Sheet: HVCxxxP High Voltage PMT Cables (OEM)
Accessory Cables for Photomultiplier Tubes, SPMs, and APDs Accessory Cables
These high quality accessory cables are used to connect trigger and preamp output signals from Vertilon sensor interface boards to a PhotoniQ data acquisition system or other laboratory instrument. The cables are also compatible with the SDS232 distribution system for single element sensors.




SMB120
SMB120X8




Coaxial cable, SMB plug to BNC plug - 120 cm
Coaxial cable, SMB plug to BNC plug - 120 cm, pack of 8

Interconnect Products for Photomultiplier Tubes, SPMs, and APDs Interconnect Products
Miscellaneous PhotoniQ interconnect products can be found here.



SIB1632



Dual 16 Channel to 32 Channel Cable Merge
Product Sheet: SIB1632 Dual 16 Channel to 32 Channel Cable Merge